DAN’S WI-FI AND OLED UPGRADE FOR THE MIGHTYOHM GEIGER COUNTER KIT
Posted: Tue Mar 22, 2022 1:34 pm
Hi there,
I built the geiger counter kit and it works fine. I read about the upgrade "DAN'S WI-FI AND OLED UPGRADE FOR THE MIGHTYOHM GEIGER COUNTER KIT" and bought the Adafruit Feather HUZZAH ESP8266 and Adafruit FeatherWing OLED. But when I compile the example program I get an error message (see below).
Could someone help me on this?
Many thanks!
Bambam
In file included from c:\Users\bb\Documents\Arduino\libraries\EspSoftSerial-master/EspSoftSerialRx.h:18:0,
from C:\Users\bb\Desktop\Geiger_WiFi_OLED\Geiger_WiFi_OLED.ino:23:
c:\Users\bb\Documents\Arduino\libraries\EspSoftSerial-master/CircularBuffer.h:10:7: error: redeclared with 2 template parameters
class CircularBuffer
^
In file included from C:\Users\bb\Desktop\Geiger_WiFi_OLED\Geiger_WiFi_OLED.ino:22:0:
c:\Users\bb\Documents\Arduino\libraries\CircularBuffer/CircularBuffer.h:41:119: note: previous declaration 'template<class T, unsigned int S, class IT> class CircularBuffer' used 3 template parameters
template<typename T, size_t S, typename IT = typename Helper::Index<(S <= UINT8_MAX), (S <= UINT16_MAX)>::Type> class CircularBuffer {
^
Multiple libraries were found for "CircularBuffer.h"
Used: C:\Users\bb\Documents\Arduino\libraries\CircularBuffer
Not used: C:\Users\bb\Documents\Arduino\libraries\EspSoftSerial-master
Compilation error: exit status 1
I built the geiger counter kit and it works fine. I read about the upgrade "DAN'S WI-FI AND OLED UPGRADE FOR THE MIGHTYOHM GEIGER COUNTER KIT" and bought the Adafruit Feather HUZZAH ESP8266 and Adafruit FeatherWing OLED. But when I compile the example program I get an error message (see below).
Could someone help me on this?
Many thanks!
Bambam
In file included from c:\Users\bb\Documents\Arduino\libraries\EspSoftSerial-master/EspSoftSerialRx.h:18:0,
from C:\Users\bb\Desktop\Geiger_WiFi_OLED\Geiger_WiFi_OLED.ino:23:
c:\Users\bb\Documents\Arduino\libraries\EspSoftSerial-master/CircularBuffer.h:10:7: error: redeclared with 2 template parameters
class CircularBuffer
^
In file included from C:\Users\bb\Desktop\Geiger_WiFi_OLED\Geiger_WiFi_OLED.ino:22:0:
c:\Users\bb\Documents\Arduino\libraries\CircularBuffer/CircularBuffer.h:41:119: note: previous declaration 'template<class T, unsigned int S, class IT> class CircularBuffer' used 3 template parameters
template<typename T, size_t S, typename IT = typename Helper::Index<(S <= UINT8_MAX), (S <= UINT16_MAX)>::Type> class CircularBuffer {
^
Multiple libraries were found for "CircularBuffer.h"
Used: C:\Users\bb\Documents\Arduino\libraries\CircularBuffer
Not used: C:\Users\bb\Documents\Arduino\libraries\EspSoftSerial-master
Compilation error: exit status 1