I am wiring my own ATTINY2313 'fuse fixer' on a breadboard but I am having a few problems working out the pin connections.
I am using an external 12V supply via a transistor setup.
I know I am being really thick, but could these pin connections please be verified for me.
Code: Select all
ATTINY2313 => ATMEGA328P
1 => 12V
2 => NC
3 => 19
4 => NC
5 => 26
6 => 17
7 => 16
8 => 28 / (25*)
9 => 14
10 => GND
11 => 27 / (15*)
12 => 2
13 => 3
14 => 4
15 => 5
16 => 6
17 => 11
18 => 12
19 => 13
20 => 5V
* Is this pin connection required or can it be ignored with an ATTINY2313?
Many thanks