Madplay installation
Posted: Wed Apr 10, 2013 6:35 am
Hello everyone,
I'm planning to make a wifi radio, to stream web radio stations.
Recently, I bought a Tp-Link router, model TL-WR703N. It is a small travel router, supported by Openwrt: http://wiki.openwrt.org/toh/tp-link/tl-wr703n
A few specs:
-Atheros AR7240 CPU (400Mhz)
-Atheros AR9331 Chipset (integrated wireless)
-802.11 b/g/n 150Mbps (130Mbps real)
-wireless power output 20dBm - 100mW
-4 MB flash memory
-32 MB RAM
-USB 2.0 port (High-Speed only, use an external High-Speed hub for Full/Low-Speed devices)
-Powered via micro-USB socket
-Tiny form factor: 5.7cm x 5.7cm x 1.8cm
I found a way to install the new firmware, without going thru telnet and ssh stuff, from http://www.madox.net.
I installed their Base image, that contains the Luci interface and has basic modules. For a beginner, that was a great help, since the Luci interface is included in the image file.
Reading more and more, I found that I have to install the following packages:
-kmod-usb-audio
-kmod-sound-core
-alsa drivers
I installed all three of them, from Madox's repository and I'm stuck with installation of madplay. They don't have it in their repository and when I tried to download from openwrt's repository I got the message : "package found but incompatible with structure architectures configured".
I looked at the space available and I still have ~ 244 kb free, for modules installation.
Can anyone help me, how can I install madplay on this router ?
Thank you in advance.
claus14
I'm planning to make a wifi radio, to stream web radio stations.
Recently, I bought a Tp-Link router, model TL-WR703N. It is a small travel router, supported by Openwrt: http://wiki.openwrt.org/toh/tp-link/tl-wr703n
A few specs:
-Atheros AR7240 CPU (400Mhz)
-Atheros AR9331 Chipset (integrated wireless)
-802.11 b/g/n 150Mbps (130Mbps real)
-wireless power output 20dBm - 100mW
-4 MB flash memory
-32 MB RAM
-USB 2.0 port (High-Speed only, use an external High-Speed hub for Full/Low-Speed devices)
-Powered via micro-USB socket
-Tiny form factor: 5.7cm x 5.7cm x 1.8cm
I found a way to install the new firmware, without going thru telnet and ssh stuff, from http://www.madox.net.
I installed their Base image, that contains the Luci interface and has basic modules. For a beginner, that was a great help, since the Luci interface is included in the image file.
Reading more and more, I found that I have to install the following packages:
-kmod-usb-audio
-kmod-sound-core
-alsa drivers
I installed all three of them, from Madox's repository and I'm stuck with installation of madplay. They don't have it in their repository and when I tried to download from openwrt's repository I got the message : "package found but incompatible with structure architectures configured".
I looked at the space available and I still have ~ 244 kb free, for modules installation.
Can anyone help me, how can I install madplay on this router ?
Thank you in advance.
claus14