MightyOhm.com

allready found out that it was misspelled,do you know if I can use the atmega 328 for the display ? Found a complete kit on eBay: http://www.ebay.com/itm/Arduino-Starter-Kit-Duemilanove-ATmega-328-version-1602-/270627362140 Also I can't get it connected to my wpa/wpa2psk network,only if I make it in...

each time i type opkg update i get the following error: root@OpenWrt:/# opkg update Downloading http://mightyohm.com/files/kamikaze-2.4/packages/mipsel/Packages/Pac kages.gz wget: bad address 'mightyohm.com' Signiture check for snapshots skipped because GPG support was not enabled in thi s build Col...

i totally can't get it working on encrypted network, i normally use wpa2-psk with aes and my ssid has a''-'' in it.
the only possible way to connect it is changing it to uncrypted

If I press w than I can edit the text but when I press w than I thought that it went back to the edit mode, and if I pressed wq than it says q is not implemented.
So I'm not quite shure if it writes to the memory.

So this weekend i finally had some time to redo it with a brand new one,This one is equipped with dd-WRT firmware,Successfully re flashed it with the open WRT (kamikaze build). But now i'm stuck with editing the files in hyperterminal. I can load the files and modify the value's,but the only thing t...

You don't need a serial port to flash the openwrt firmware. I didn't use one. However if you want to add a display and button, you need it. Second, the wl520gu is available in holland for around 45 euro. So no a lot more than on ebay. 43 euro at redcoon. 45 euro at zercom (eindhoven), used to be 25...

Hum… didnt test it beforehand, but why bother the information on the box was all plain Chinese, but I think it was a standard Asus firm. The one that I bought now ( again from eBay ) is equipped with dd-wrt on it so I dont need a serial header wright ? Anyway I made another serial adapter, cause i d...

mightyohm wrote:The router that works with my tutorial is the Asus Wl-520gU. The WL-500gU V2 should work too. I don't have any experience with other routers, you'll probably have to use a different firmware.

The one that you have bought was it equipped with the dd-wrt firmware ?

This is the crappy converter that i made

The one From lady Ada (FTDI) same as you have used for your wl 520 with hyperterminal ,But now I need to wait for the new router cause it just died about an hour ago (I screwed the pcb up :oops: ) I'll upload the pictures from the soldered prepboard tomorrow. For now i've just need to wait, But sinc...