I have had few attempts to reset fuses of Atmega8 with no success using Arduino Mega 2560.
I have build a HV shield using the schematic from 12/07/08, checked all the connections few times with the multimeter, everything seems fine. Since Arduino mega had pins 14+ i changed a bit of code to get is working, so now it reads like this:
Code: Select all
....
#define XA1 A4
#define PAGEL A5
#define RST A0
#define BS2 A2
#define XTAL1 A3
#define BUTTON A1
Code: Select all
#define HFUSE 0xD9
#define LFUSE 0xE1