Rescue board as programmer

Topics related to the HV Rescue Shield:
http://mightyohm.com/hvrescue2
Post Reply
dehaveda
Posts: 1
Joined: Fri Feb 10, 2012 6:44 pm

Rescue board as programmer

Post by dehaveda »

After taking a quick look at the schematic it looks like the rescue shield could be used as a programmer through the SPI port. Of course, a new Arduino sketch would have to be developed. Is this correct?
User avatar
mightyohm
Site Admin
Posts: 1064
Joined: Fri Apr 03, 2009 10:29 pm
Location: Seattle, WA
Contact:

Re: Rescue board as programmer

Post by mightyohm »

What do you mean by "through the SPI port"?

It should be possible to use the Rescue Shield as a general purpose AVR programmer. As you mentioned, a new Arduino sketch needs to be developed.
Post Reply