MEGA ADK

Topics related to the HV Rescue Shield:
http://mightyohm.com/hvrescue2
mdn15
Posts: 1
Joined: Sat Nov 23, 2013 12:12 pm

MEGA ADK

Postby mdn15 » Sat Nov 23, 2013 12:19 pm

I cannot seem to get the HV Rescue Shield 2.1 to work with the MEGA ADK. Is it incompatible. it has the same processer as the Arduino Mega?

More specifically, I can load the Sketch (and yes I have modified the flags to say that Im using a Mega), but I cannot get interactive or automatic modes to work.

Any advice or help would be greatly appreciated.

Regards

User avatar
mightyohm
Site Admin
Posts: 1004
Joined: Fri Apr 03, 2009 10:29 pm
Location: Seattle, WA
Contact:

Re: MEGA ADK

Postby mightyohm » Sun Dec 08, 2013 10:19 pm

Do you have the Rescue Shield installed as shown here?
http://mightyohm.com/blog/2011/03/hv-re ... uino-mega/

Do you have a regular Mega or Uno around that you can test with to make sure your Rescue Shield is working?

Also, double-check the baud rate setting in the serial monitor. It should be set to 9600 baud.