PCB board manufacture

Topics related to the HV Rescue Shield:
http://mightyohm.com/hvrescue2
Post Reply
barney
Posts: 1
Joined: Sun Mar 10, 2013 5:12 am

PCB board manufacture

Post by barney »

Put together the Rescue Shield last night an rescued 5 attiny85's. Only 20 or so more to go till I'm even, but love the shield concept and code so I guess I'm even already.

Anyway I noticed the nice work on the SMT's, for the power boost circuit, that came on the board. I assume these were production made and not home done. Can anyone give me a few leads as to what manufactures I can work with to get one of my crazy ideas into production. I would prefer US made but not fanatical about it and am not willing pay a significant premium if there is that drastic of a difference between China and USA.

Great work on the board design. Thanks.
User avatar
mightyohm
Site Admin
Posts: 1064
Joined: Fri Apr 03, 2009 10:29 pm
Location: Seattle, WA
Contact:

Re: PCB board manufacture

Post by mightyohm »

Hi barney,

Actually, I do solder every Rescue Shield PCB by hand! I use a solder paste stencil from OHARARP (http://ohararp.com/Stencils.html) and a custom hot plate that I built. Details about the hot plate are here: http://mightyohm.com/blog/2009/01/diy-p ... -hotplate/

This setup works really well. It's a slow process but the results are worth it, as you can see.

For professional assembly I'm not sure where to go, but I've heard good things about Screaming Circuits.
Post Reply