Page 1 of 1
Which inductor type for boost converter?
Posted: Thu Dec 23, 2010 12:59 pm
by peterloron
Howdy. Can you provide some more information on which type of 22uH inductor is used for L1? I bought the PCB and am slowly gathering the parts to put it together. I have a 23uH axial inductor, but no SMT one, so I'm probably going to place an order and need to know which ones to buy...
Thanks!
-Pete
Re: Which inductor type for boost converter?
Posted: Thu Dec 23, 2010 6:01 pm
by mightyohm
L1 is a 22nH 0805 chip inductor (not wirewound). The specs are pretty easy so most 22nH 0805 footprint inductors are probably fine for this. I'm using a Taiyo Yuden LB-series part: LBR2012T220K.
Re: Which inductor type for boost converter?
Posted: Thu Dec 23, 2010 7:41 pm
by peterloron
Thanks for the response. FYI...the schematic posted at the link below shows L1 as 22uH, not 22nH.
http://mightyohm.com/files/hvrescue2/HV ... ematic.png
Re: Which inductor type for boost converter?
Posted: Thu Dec 23, 2010 8:11 pm
by mightyohm
That's the RF engineer in me, sorry, 22uH (microhenries) is correct.