FJN3303F

Support forum for the mightyohm.com Geiger Counter.
http://mightyohm.com/geiger
TimeWaster
Posts: 6
Joined: Tue Jul 31, 2012 1:16 pm

Re: FJN3303F

Post by TimeWaster »

i have used a kit i bought from your website, so all the right components.
my perfboard is as small as possible, which could be a problem.

i never put my finger ON the board, only hovering over it.

because of the problems i had with this circuit i built another circuit found on another page.

i thank you for all your help.
Last edited by TimeWaster on Wed Sep 26, 2012 9:50 pm, edited 1 time in total.
User avatar
mightyohm
Site Admin
Posts: 1064
Joined: Fri Apr 03, 2009 10:29 pm
Location: Seattle, WA
Contact:

Re: FJN3303F

Post by mightyohm »

(I know it's too late, but the schematic is finally fixed!)

http://mightyohm.com/files/geiger/geige ... edR5R6.png
elmo23x
Posts: 5
Joined: Mon Dec 10, 2012 1:02 am

Re: FJN3303F

Post by elmo23x »

I am trying to use a MJE13007... but I did not manage to make it work yet! :)
Post Reply