Experimental analog-circuit gas detector / alarm

Discussion about events, resources, or any topic not related to one of the project forums below.
Post Reply
ki3u
Posts: 36
Joined: Mon Sep 23, 2013 12:31 pm

Experimental analog-circuit gas detector / alarm

Post by ki3u »

For anyone interested I've put online on my website a description of my experiments resulting in
the development of an experimental gas detector / alarm based on analog circuitry, and not involving any digital electronics :

http://ki3u.byethost3.com/Instruments_e ... alarm.html

The detector / alarm system was primarily geared toward natural gas (methane) and butane, but there were
interesting surprises with what it sniffed.

Berj / KI3U
ki3u
Posts: 36
Joined: Mon Sep 23, 2013 12:31 pm

Re: Experimental analog-circuit gas detector / alarm

Post by ki3u »

NeilXu wrote :

" Hi...i am a new user here. I took a look at your circuit and there a few things that I can mention. Firstly, if you need something as complex as a GSM Modem, you will need to create a LabVIEW instrument for it if that is possible. If you know the exact input you are going to receive, you can use something like a PIECEWISE_LINEAR_VOLTAGE source which is in the Sources Group and the SIGNAL_VOLTAGE_SOURCES Family. "

I think you are in the wrong thread here.

Berj / KI3U
User avatar
mightyohm
Site Admin
Posts: 1064
Joined: Fri Apr 03, 2009 10:29 pm
Location: Seattle, WA
Contact:

Re: Experimental analog-circuit gas detector / alarm

Post by mightyohm »

He was a spammer, account deleted. Sorry about that.
Post Reply