Mechanicals for NooElec SDR dongle + H.F. Up-Converter

Discussion about events, resources, or any topic not related to one of the project forums below.
Post Reply
ki3u
Posts: 36
Joined: Mon Sep 23, 2013 12:31 pm

Mechanicals for NooElec SDR dongle + H.F. Up-Converter

Post by ki3u »

I have the Opendous-designed NooElec H.F. up-converter. Conventionally, when this converter
is enclosed in the specified aluminum shield box, the power to the converter is to be supplied via a usb
connection.

I preferred the converter independently powered from batteries, and with those batteries also enclosed
in the shield box. I went ahead and tried it, and it has worked out well. Here's the write-up with pictures:

Mechanicals for the NooElec SDR dongle + H.F. Up-Converter

http://ki3u.byethost3.com/Radio-Physics ... Smain.html

I also show an experiment with the converter which involves only analog electronics, no SDR etc. involved.

Berj / KI3U
Post Reply