I have the Opendous-designed NooElec H.F. up-converter. Conventionally, when this converter
is enclosed in the specified aluminum shield box, the power to the converter is to be supplied via a usb
I preferred the converter independently powered from batteries, and with those batteries also enclosed
in the shield box. I went ahead and tried it, and it has worked out well. Here's the write-up with pictures:
Mechanicals for the NooElec SDR dongle + H.F. Up-Converter
http://ki3u.byethost3.com/Radio-Physics ... Smain.html
I also show an experiment with the converter which involves only analog electronics, no SDR etc. involved.
Berj / KI3U
Discussion about events, resources, or any topic not related to one of the project forums below.
1 post • Page 1 of 1