Search found 109 matches
- Sat Mar 17, 2012 5:19 am
- Forum: Wifi Radio Project / Hacking the Asus WL-520gU
- Topic: AAC support needed
- Replies: 7
- Views: 18634
Re: AAC support needed
I'm using the Asus WL-500g (both the deluxe and premium models), not the 520U. These have 2 USB ports already. Doesn't the 520 have the option of adding an internal USB port as well? I know the 500 has an internal header to add another pair of USB ports.
- Thu Mar 15, 2012 12:39 am
- Forum: Wifi Radio Project / Hacking the Asus WL-520gU
- Topic: AAC support needed
- Replies: 7
- Views: 18634
Re: AAC support needed
True. I always use a USB memory stick for extra storage.mightyohm wrote:Pretty sure this won't fit in the flash of the 520gu. Maybe it will fit on the 500gp v2 (what djmasterg is using), though?
- Tue Mar 13, 2012 2:42 am
- Forum: Wifi Radio Project / Hacking the Asus WL-520gU
- Topic: AAC support needed
- Replies: 7
- Views: 18634
Re: AAC support needed
You can use a newer version of OpenWrt. I personally use openwrt 10.03, which includes mpd 0.15.8 with ffmpeg. This has AAC support (I'm assuming this works. Haven't tested it though).
Jeroen
Jeroen
- Sat Mar 03, 2012 7:19 am
- Forum: Wifi Radio Project / Hacking the Asus WL-520gU
- Topic: Sound problem
- Replies: 4
- Views: 12384
Re: Sound problem
Yes, a USB hub can cause these kinds of issues when the host (i.e. you router) cannot provide enough power for all the devices attached to it. So I wouldn't be surprised if powering the hub solves your issue.
- Sat Feb 18, 2012 5:20 am
- Forum: Wifi Radio Project / Hacking the Asus WL-520gU
- Topic: Any chance for a board to be produced?
- Replies: 34
- Views: 95800
Re: Any chance for a board to be produced?
Thanks for the kind words everybody. The keypad (up/down/left/right/enter/mode) is used to navigate the player's mp3 collection (stored, in my case, on an NFS network share). I've created a repository on github which includes all the code (both on the AVR and router-side), all the Eagle schematics a...
- Tue Feb 14, 2012 10:55 am
- Forum: Wifi Radio Project / Hacking the Asus WL-520gU
- Topic: Router not receiving data from AVR
- Replies: 5
- Views: 14564
Re: Router not receiving data from AVR
Are you comfortable making changes to the code? I tend to connect an LED to one of the GPIO pins of the microcontroller so I have at least some means of producing debugging output. That way, you can check if the ADC value inside the microcontroller corresponds with what you expect. As a last ditch e...
- Sun Feb 12, 2012 1:35 pm
- Forum: Wifi Radio Project / Hacking the Asus WL-520gU
- Topic: Any chance for a board to be produced?
- Replies: 34
- Views: 95800
Re: Any chance for a board to be produced?
It works! This is the board after etching (The picture is blurry, not the PCB :) ). As an aside, this was my absolute first ever try at toner transfer PCB production, and I'm amazed at how easy it is and how high the quality of the result is. I'll definitely be making many more PCB's using this meth...
- Fri Feb 10, 2012 10:53 am
- Forum: Wifi Radio Project / Hacking the Asus WL-520gU
- Topic: Version of OpenWRT
- Replies: 4
- Views: 14402
Re: Version of OpenWRT
Unless Jeff answers this, it may be hard to find which SDK is compatible with the image you find on MightyOhm.com. The easiest thing to do would be to install an official release and use the SDK that comes with it. The downside of this is that you probably won't be able to fit a working wifi radio i...
- Fri Feb 03, 2012 1:19 pm
- Forum: Wifi Radio Project / Hacking the Asus WL-520gU
- Topic: Any chance for a board to be produced?
- Replies: 34
- Views: 95800
Re: Any chance for a board to be produced?
Ok, one more revision. I got the advice to avoid 90 degree angles in PCB's, so here's a design without them. I also added back a 10 uF stabilizing cap near the 5V input, just to be safe.
Jeroen
Jeroen
- Mon Jan 30, 2012 12:32 pm
- Forum: Wifi Radio Project / Hacking the Asus WL-520gU
- Topic: Any chance for a board to be produced?
- Replies: 34
- Views: 95800
Re: Any chance for a board to be produced?
Here's a new version of the board. The autorouter pissed me off, so I did the routing manually this time. This has lead to a much tighter design, IMO. I also removed the voltage regulator circuit, since the power supply solution will probably differ for every build, and it didn't make sense for the ...